Price Comparison of Isolation Milling Routing Bits
Price comparison is for prices as of 12/16/2003 Bits should have a 1/8" diameter shaft (3.175mm) & 7.5mm collets for use with ATC. I have not purchased all of these bits so i can't comment on the quality differences.
Bungard:
Prices are 81.30EUR so the cost is dependent on the conversion rate of the EURO -> USD
Bungard doesn't overcharge for their drill bits! They are by far the lowest cost per bit.
G30N = 100/10 = $10/bit
G60N = 100/10 = $10/bit
Purchase 5-10 and receive a 10% discount. Therefore 500 - 50 = 450 / 50 bits = $9/bit
LPKF:
LPKF sells bits in packs of 10, bits have 36mm overall length
.2mm-.3mm for traces 8-12 mils = $170/10 = $17/bit
.1-.15mm for traces 4-6mil = $210/10 = $21/bit
T-Tech:
T-Tech sells bits in packs of 10 for $280-$320
ThinkTink.com
ThinkTink sells bits which come can be set with a collet.
.007" = $253.00 for 10 = 25.30/bit
