Blake Robertson

contains a few sensor boards designed by Ben Funk that i put onto the daughter boards

same as below except in word

Documents the features / functional blocks of the design of the prototype platform.

eagle cad board file which contains the motherboard and two daughter cards i made (sensor-comboSensorBrd & sensor-emptyTemplete) which are connected by tabs which allow the seperate boards to snap apart.

gerber files for the above that were sent to advanced circuits to have them fabbed.

Eagle Board File - for designing your own application specific daughter card which connects to the mother card (smdust-v4).

Eagle Schematic File - for designing your own application specific daughter card which connects to the mother card (smdust-v4).

Eagle BRD file - for a sensor daughter card which has a bunch of holes .1" apart for doing through hole prototyping.

Eagle Board File - which is an example of an application circuit which i built using the empty templete's below. The design has a MEMs microphone and a I2C temperature sensor. Each which interface to the uC on one of the available PORTA pins. (sorry schematic not available)

Eagle BRD File for zigbee mother board card that Chipcon 2420EB plugs into on one side and on the other a sensor daughter card (see sensor-EmptyTemplete) can be attached to allow for the application specific circuitry.

Eagle Schematic for the above